About Us

Since the time 1970 Mitsubishi has utilized a four digit naming show to recognize their motors. The underlying four digits might be enhanced with different postfixes to separate the motors considerably further however generally the initial four digits are the fundamental motor code.

The principal digit in this arrangement assigns the number of chambers the motor has, for instance: a 2 would mean it was a two chamber, a 3 would mean it was a straight three chamber, a 4 would make it an inline four chamber, a 6 indicates a V6 design and a 8 distinguishes the motor as a v8.

From 1970 through 1980 the subsequent letter represented the fuel type, D was for diesel and G was for gas, in the 80’s this changed as Mitsubishi acquainted the letter A with indicate the utilization of a compound chamber head. This has since advanced with the utilization of M and B in certain motor codes so unique shows presently don’t matter.

The third digit used to indicate the motor family the line got from, for instance the four chamber motor families were meant as follows: 4G1 was the Orion motor family, 4G3 was the Saturn motor family, 4G4 was the Neptune motor family, 4G5 was the Astron motor family and the 4G6 was from the Sirius motor family.

The fourth of these digits means the particular motor model inside its family.

It isn’t irregular to see either a T or a B following the underlying four digits. The T would indicate the motor similar to a turbo charged adaptation and the B would signify the motor just like the second form of a motor.

During that time Mitsubishi has utilized a wide range of motor arrangements, from one chamber as far as possible up to eight chamber designs.

The single chamber motors were the absolute first motors utilized in Mitsubishi vehicles which were engine bikes and three wheelers. The single chambers were separated as follows: the NE/NE1 which was side valve and air cooled, the NE10 which was in the celebrated Silver pigeon bike. Later down the line different variations were presented, for example, the NE7 the NE9 and the NE8 which was an overhead valve arrangement. At that point there was the ME20 which was a 309cc water cooled overhead valve motor which was prepared in the three wheeled Leo.

The Two chamber setups were usually found in the 1960’s. They incorporated any semblance of the 2G1 which was first presented in original Minicas in 1968. This was slowly supplanted by the ME24 air cooled motor. That was then supplanted by the 2G10. The NE19A was an air cooled 493cc overhead valve motor initially presented in the Mitsubishi 500. That was the primary traveler vehicle worked by Mitsubishi after world war two. NE35A was a 594cc accessible in the Mitsubishi 500 and Mitsubishi Colt 600. The 2G2 Vulcan motor which was a four stroke overhead cam which was the archetype to the 2G1.

The three chamber motors delivered by Mitsubishi are for the most part intended for Japanese market Kei vehicles. The motors incorporate codes, for example, the 3A9 utilized in the 2005 Colt, the 3B2 utilized in the 3002 Mitsubishi I, and the 3G8 which was the primary creation motor to highlight five valves for each chamber.

The four chamber motors created by Mitsubishi fell into twelve distinct families. The 4A3 which was intended for Japanese Kei vehicles in 1994, the 4A9 which was presented in the 2003 foal, the 4B1 which was created close by Daimler Chrysler and Hyundai and included an aluminum motor square and Move variable valve timing, the 4DR which was delivered as a turbo diesel motor, the 4G1 known as the Orion motor family, the 4G3 known as the Saturn motor family, the 4G4 known as the Neptune motor family, the 4G5 known as the Astron motor family, the 4G6 known as the Sirius motor family, the 4G9 which offered the principal GDI or fuel direct infusion framework, the 4M4 which was Mitsubishi swap for the previously mentioned Astron diesel motors, the 4N1 which is a perfect consume diesel presented in 2009 and the KE4 which was an overhead valve straight four utilized in late 60’s colts.

The six chamber motors delivered by Mitsubishi were assigned into three diverse motor families. The 6A1 was accessible in the 1992 Mitsubishi Mirage, the 6B3 family was presented in the 2007 Out lander, the 6G7 which was first observed in 1986 and includes become a staple inside the organization seeing use in various models, the KE64 which is a straight six motor got from the KE4 plan and the Saturn 6 motor which was accessible in the Mitsubishi Debonair in the 1970’s.

The one section into the eight chamber commercial center by Mitsubishi was the 8A8, this was an amalgam headed V8 design and was utilized in the Japan just market.

All through Mitsubishi’s car history the organization keeps on creating and keep up elevated expectations for its present motor lines. It is no big surprise Mitsubishi is such a solid player n the car market and will keep on being so for a long time to come.